Link Aggregation Control Protocol Command; Lacp Configuration; Lacp Mode - Planet Networking & Communication WGSW-24040 User Manual

6.10 Link Aggregation Control Protocol Command

LACP Configuration

Description:
Show LACP configuration.
Syntax:
LACP Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show LACP configuration
WGSW-24040:/>lacp configuration
Port Mode
---- -------- ----
1 Disabled Auto Active
2 Disabled Auto Active
3 Disabled Auto Active
4 Disabled Auto Active
5 Disabled Auto Active
6 Disabled Auto Active
7 Disabled Auto Active
8 Disabled Auto Active
9 Disabled Auto Active
10 Disabled Auto Active

LACP Mode

Description:
Set or show LACP mode.
Syntax:
LACP Mode [<port_list>] [enable|disable]
Parameters:
Key Role
------
User's Manual of WGSW-24040 / WGSW-24040R
467