Qos Qcl Add - Planet Networking & Communication WGSW-24040 User Manual

QoS QCL Add

Description:
Add or modify QoS Control Entry (QCE).
If the QCE ID parameter <qce_id> is specified and an entry with this QCE ID already exists, the QCE will be modified.
Otherwise, a new QCE will be added. If the QCE ID is not specified, the next available QCE ID will be used. If the next
QCE ID parameter <qce_id_next> is specified, the QCE will be placed before this QCE in the list. If the next QCE ID is not
specified and if it is a new entry added, the QCE will be placed last in the list. Otherwise if the next QCE ID is not specified
and if existing QCE is modified, QCE will be in the same location in the list. To modify and move the entry to last in the list,
use the word 'last' for <qce_id_next>.
Syntax:
QoS QCL Add [<qce_id>] [<qce_id_next>] [<port_list>] [<tag>] [<vid>] [<pcp>] [<dei>] [<smac>] [<dmac_type>]
[(etype [<etype>]) | (LLC [<DSAP>] [<SSAP>] [<control>]) | (SNAP [<PID>]) | (ipv4 [<protocol>] [<sip>] [<dscp>]
[<fragment>] [<sport>] [<dport>]) | (ipv6 [<protocol>] [<sip_v6>] [<dscp>] [<sport>] [<dport>])] [<class>] [<dp>]
[<classified_dscp>]
Parameters:
<qce_id>
<qce_id_next>
: Port List: "port <port_list> or 'all'", default: All ports
<port_list>
<tag>
<vid>
<pcp>
<dei>
<smac>
<dmac_type>
etype
<etype>
: LLC keyword
llc
<dsap>
<ssap>
: LLC control: 0x00-0xFF or 'any'
<control>
snap
<pid>
: IPv4 keyowrd
ipv4
<protocol>
<sip>
<dscp>
: QCE ID (1-256), default: Next available ID
: Next QCE ID: "next_id (1-256) or 'last'"
: Frame tag: untag|tag|any
: VID: 1-4095 or 'any', either a specific VID or range of VIDs
: Priority Code Point: specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'any'
: Drop Eligible Indicator: 0-1 or 'any'
: Source MAC address: (xx-xx-xx) or 'any', 24 MS bits (OUI)
: Destination MAC type: unicast|multicast|broadcast|any
: Ethernet Type keyword
: Ethernet Type: 0x600-0xFFFF or 'any' but excluding 0x800(IPv4) and 0x86DD(IPv6)
: Destination Service Access Point: 0x00-0xFF or 'any'
: Source Service Access Point: 0x00-0xFF or 'any'
: SNAP keyword
: Protocol ID (EtherType) or 'any'
: IP protocol number: (0-255, TCP or UDP) or 'any'
: Source IP address: (a.b.c.d/n) or 'any'
: DSCP: (0-63,BE,CS1-CS7,EF or AF11-AF43) or 'any', specific or range
User's Manual of WGSW-24040 / WGSW-24040R
500