Sfp Information - Planet Networking & Communication WGSW-24040 User Manual

Buttons
: Click to refresh the page immediately.
: Clears the counters for all ports.
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
4

.4.4 SFP Information

You can check the physical or op
operational status, such as the transceiver type, speed, and wavelength and supports distance of SFP module on a specific
interface. You can also use the hyperlink of port no. to check the statistics on a speficic interface. The SFP Module Information
screen in Figure 4-4-4 appears.
The page includes the following fields:
Object
 Type
 Speed
 Wave Length(nm)
 Distance(m)
erational status of an SFP module via the SFP Module Information page. This page shows the
Figure 4-4-4 SFP Module Information for Switch page screenshot
Description
Display the type of current SFP module, the possible types are:

100 0Base-SX

1000Base-LX

100Base-FX
Display the spedd of current SF
from the SFP module. Differe
speed information.
Display the wavelength of cur
the SFP module. Use this column to check if the wavelength values of two nodes
are the matched while the fiber connection is failed.
Display the supports distance of current SFP module
from the SFP module.
User's Manual of WGSW-24040 / WGSW-24040R
P module, the speed value or description is get
nt vendors SFP modules might shows different
rent SFP module, the wavelength value is get from
93
, the distance value is get