Security Network Dhcp Snooping Port Mode - Planet Networking & Communication WGSW-24040 User Manual

Security Network DHCP Snooping Mode [enable|disable]
Parameters:
enable : Enable DHCP snooping mode.
When enable DHCP snooping mode operation, the request DHCP messages will be forwarded to trusted ports
and only allowed reply packets from trusted ports.
disable: Disable DHCP snooping mode
(default: Show flow DHCP snooping mode)
Default Setting:
disable
Example:
Enable DHCP snooping mode
WGSW-24040:/>security network dhcp snooping mode enable

Security Network DHCP Snooping Port Mode

Description:
Set or show the DHCP snooping port mode.
Syntax:
Security Network DHCP Snooping Port Mode [<port_list>] [trusted|untrusted]
Parameters:
<port_list>: Port list or 'all', default: All ports
trusted : Configures the port as trusted sources of the DHCP message
untrusted: Configures the port as untrusted sources of the DHCP message
(default: Show flow DHCP snooping port mode)
Default Setting:
trusted
Example:
Set untrusted DHCP snooping port mode in port 1
WGSW-24040:/>security network dhcp snooping port mode 1 untrusted
User's Manual of WGSW-24040 / WGSW-24040R
438