Switch Rear Panel - Planet Networking & Communication SGS-5220 User Manual

2.1.3 Switch Rear Panel

The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz. Figures 2-1-4A, 2-1-4B and 2-1-4C
SGS-5220-24T2X Rear Panel
SGS-5220-24P2X Rear Panel
SGS-5220-24S2XR Rear Panel
■ 10 Gigabit Stacked SFP+ slot
10GBASE-SR/LR mini-GBIC slot, SFP+ Transceiver Module supports from 300 meters (multi-mode fiber) to up to 10
kilometers (single-mode fiber)
■ AC Power Receptacle
For compatibility with electrical service in most areas of the world, the Managed Switch's power supply automatically
adjusts line power in the range of 100-240V AC and 50/60 Hz.
Plug the female end of the power cord firmly into the receptalbe on the rear panel of the Managed Switch and the other end
into an electrical service outlet and the power will be ready.
The device is a power-required device, which means it will not work till it is powered. If your networks
should be active all the time, please consider using UPS (Uninterrupted Power Supply) for your device.
Power Notice: It will prevent you from network data loss or network downtime. In some areas, installing a surge
suppression device may also help to protect your Managed Switch from being damaged by unregulated
surge or current to the Switch or the power adapter.
show the rear panel of the Managed Switch.
Figure 2-1-4A: Rear Panel of SGS-5220-24T2X
Figure 2-1-4B: Rear Panel of SGS-5220-24P2X
Figure 2-1-4C: Rear Panel of SGS-5220-24S2XR
29
User's Manual of SGS-5220 Series