WGSW-24040:/>security network arp inspection port mode 1
Security Network ARP Inspection Entry
Description:
Add or delete ARP inspection static entry.
Syntax:
Security Network ARP Inspection Entry [<port_list>] add|delete <vid> <allowed_mac> <allowed_ip>
Parameters:
<port_list> : Port list or 'all', default: All ports
: Add new port ARP inspection static entry
add
delete : Delete existing port ARP inspection static entry
: VLAN ID (1-4095)
<vid>
<allowed_mac>: MAC address ('xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx', x is a hexadecimal digit), MAC
address allowed for doing ARP request
<allowed_ip> : IPv4 address (a.b.c.d), IP address allowed for doing ARP request
Example:
Add ARP inspection static entry.
WGSW-24040:/>security network arp inspection entry 1 add 1 00-30-4f-00-00-11 192.168.0.11
Security Network ARP Inspection Status
Description:
Show ARP inspection static and dynamic entries.
Syntax:
Security Network ARP Inspection Status [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show ARP inspection static and dynamic entries.
WGSW-24040:/>security network arp inspection status
User's Manual of WGSW-24040 / WGSW-24040R
444