Port Scheduler - Planet Networking & Communication WGSW-24040 User Manual

 DP Level
 PCP
 DEI
 Tag Class.

DSCP Based
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

4.9.4 Port Scheduler

This page provides an overview of QoS Egress Port Schedulers for all switch ports. The Port Scheduler screen in
appears.
A QoS class of 0 (zero) has the lowest priority.
Note: If the QoS class has been dynamically changed, then the actual QoS class
is shown in parentheses after the configured QoS class.
Controls the default Drop Precedence Level, i.e., the DP level for frames not
classified in any other way.
Controls the default PCP for untagged frames.
Controls the default DEI for untagged frames.
Shows the classification mode for tagged frames on this port.
Disabled: Use default QoS class and DP level for tagged frames.
Enabled: Use mapped versions of PCP and DEI for tagged frames.
Click on the mode in order to configure the mode and/or mapping.
Click to Enable DSCP Based QoS Ingress Port Classification.
184
User's Manual of WGSW-24040 / WGSW-24040R
Figure 4-9-4