Quality Of Service Command; Qos Configuration; Qos Port Classification Class; Qos Port Classification Dpl - Planet Networking & Communication WGSW-24040 User Manual

6.13 Quality of Service Command

QoS Configuration

Description:
Show QoS Configuration.
Syntax:
QoS Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports

QoS Port Classification Class

Description:
Set or show the default QoS class.
If the QoS class has been dynamically changed, then the actual QoS class is shown in parentheses after the configured
QoS class.
Syntax:
QoS Port Classification Class [<port_list>] [<class>]
Parameters:
<port_list>: Port list or 'all', default: All ports
: QoS class (0-7)
<class>
Default Setting:
0
Example:
Set default QoS class in 1 for port 1
WGSW-24040:/>qos Port Classification Class 1 1

QoS Port Classification DPL

Description:
Set or show the default Drop Precedence Level.
User's Manual of WGSW-24040 / WGSW-24040R
484