[Duplex Print (Rx)]; [Letter/Ledger Over A4/A3]; [Print Paper Selection] - Muratec MFX-C2280 Fax Manual

Settings

[Letter/Ledger over A4/A3]

[Print Paper Selection]

[Print Paper Size]
[Incorrect User Box No. En-
try]
[Tray Selection for RX Print]
[Min. Reduction for RX
Print]
[Print Separate Fax Pages]
[File After Polling TX]
[No. of Sets (RX)]
[Individual Receiving Line
Setup]
[Individual Sender Line
Setup]
[RX Document Print Set-
tings]

[Duplex Print (RX)]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [Duplex Print (RX)]
Select whether to print an original on both sides of sheets of paper when a fax having multiple pages is re-
ceived.
This option is not available if [Print Separate Fax Pages] is set to [ON].
[OFF] is specified by default.
[Letter/Ledger over A4/A3]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [Letter/Ledger over A4/A3]
Select whether to preferentially print an original on inch-sized paper when a fax is received.
The default value depends on the country the machine is used in.
[Print Paper Selection]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [Print Paper Selection]
Select the criteria for selecting the fax reception paper.
Settings
[Auto Select]
Description of Setup Buttons (Administrator Settings)
Description
Select whether to preferentially print an original on inch-sized paper when
a fax is received.
For details on settings, refer to page 11-21.
Select the criterion of selecting paper for printing a fax.
For details on settings, refer to page 11-21.
Select the paper size to print received faxes on.
For details on settings, refer to page 11-22.
Select the action taken by the machine if an unregistered user box is spec-
ified for receiving a fax using the machine's box.
For details on settings, refer to page 11-22.
Specify a paper tray if you want to fix the paper tray used to print a fax.
For details on settings, refer to page 11-22.
If necessary, change the reduction ratio that is used when printing a fax.
For details on settings, refer to page 11-22.
Select whether to print a fax longer than the standard size on separate pag-
es.
For details on settings, refer to page 11-22.
Select whether to delete a file after it is sent in response to a polling request
if the Polling TX function is used to register files for polling.
For details on settings, refer to page 11-22.
If necessary, change the number of copies to print a fax.
For details on settings, refer to page 11-23.
Select whether to receive faxes via respective lines separately if two lines
are operating.
In receiving faxes per line, you can use reception functions, such as TSI
Routing and Forward TX.
For details on settings, refer to page 11-23.
Select whether to use different sender names for the respective lines if two
lines are operating.
For details on settings, refer to page 11-23.
Select whether to print a received network fax in color or black-and-white.
For details on settings, refer to "User's Guide [Network Fax Opera-
tions]/[Description of Setup Buttons (Administrator Settings)]".
Description
Prints a fax on paper that is automatically selected to suit the fax received.
[Auto Select] is specified by default.
11
11-21