Operation Flow - Muratec MFX-C2280 Fax Manual

4.8 Sending a Fax Using an Additional Line ([Select Line])

Operation flow

1
Load the original.
2
Tap [Scan/Fax].
3
Specify the destination.
4
Tap [Application] - [Fax Setting] - [Line Setting].
5
Select a line used for transmission in [Select Line], then tap [OK].
% If [No Selection] is selected, an idle line is used. If both lines are idle, Line 1 takes precedence.
6
Press the Start key.
Transmission begins.
Sending Options
4
4-15