[Blank; [Binding Position] - Muratec MFX-C2280 Fax Manual

[Blank Page Removal]
To display: [Scan/Fax] - [Application] - [No. of Originals] - [Original Settings] - [Blank Page Removal]
Blank pages contained in the original loaded into the ADF are skipped when the original is scanned.
Select this check box when scanning an original which contains blank pages. Any blank pages that are de-
tected are not counted as original pages.
Related setting
- In case blank pages are not detected correctly even though scanning has taken place with [Blank Page
Removal] enabled, adjust the detection level for blank pages. For details, refer to page 10-6.

[Binding Position]

To display: [Scan/Fax] - [Application] - [No. of Originals] - [Original Settings] - [Binding Position]
When scanning a double-sided original, select the original binding position to prevent the binding positions
being reversed between the front and rear faces.
Settings
[Auto]
[Left Bind]
[Top Bind]
Description of Setup Buttons
Description
The binding position is automatically set. When the long side of the original
is 11-11/16 inches (297 mm) or less, the binding position is set to the long
side of paper. When the long side of the original exceeds 11-11/16 inches
(297 mm), the binding position is set to the short side of paper.
Select this option when the binding position is set to the left of the original.
Select this option when the binding position is set to the top of the original.
9
9-13