Sending A Fax After Specifying A Relay Station ([F-Code Tx]); Relay Distribution - Muratec MFX-C2280 Fax Manual

4.6

Sending a Fax after Specifying a Relay Station ([F-Code TX])

4.6 Sending a Fax after Specifying a Relay Station ([F-Code TX])

Relay distribution

The Relay Distribution function sends a fax to a relay machine, which distributes the received fax to a pre-
registered group of destinations.
Overall communications costs can be reduced by grouping relay stations and destinations by area, com-
pared to the case in which faxes are broadcast to all destinations. This function is useful when broadcasting
faxes to distant locations.
Tips
- The destination machine (the relay machine) needs to have the F-code function.
- You need to check both the Relay User Box number specified on the relay machine and the password
for relay distribution.
- This function cannot be used together with the following functions:
– Password TX, Polling TX, Polling TX (Bulletin Board), Polling RX, Polling RX (Bulletin Board).
Related setting (for the administrator)
- You can enable or disable F-Code TX (Default: [ON]). For details, refer to page 11-24.
d
Reference
This machine can also be used as a relay station. For details, refer to "User's Guide [Box Operations]/[Use
as Fax Transponder (Relay User Box)]".
Sending Options
4
4-10