6.11
Saving a Received Fax to a Specified User Box (PC-Fax RX)
6.11
Saving a Received Fax to a Specified User Box (PC-Fax RX)
PC-Fax RX
PC-Fax RX is a function that automatically saves a received fax to the Memory RX User Box or a User Box
specified in F-Code (SUB Address).
A saved fax job can be read from the User Box and into a computer.
Tips
-
This function cannot be used together with the following functions.
–
Memory RX, Forward TX, TSI Routing
-
Confidential faxes and those faxes for which relaying is requested are saved in the Confidential or Relay
User Box.
-
When Specified User Box is designated as the receiving User Box destination, faxes with no User Box
specified in F-Code are saved in the Memory RX User Box.
-
When the Memory RX User Box is specified as the receiving User Box destination, faxes with a User
Box specified in F-Code result in a communicating failure.
Operations required to use this function (for the administrator)
Enable PC-Fax RX. In conjunction, specify a User Box for saving incoming faxes.
For details on how to configure the settings, refer to page 11-27.
Tips
-
To perform password check on the Specified User Box designated as the receiving User Box destina-
tion, specify a communication password instead of a password for the User Box. The communication
password can be used commonly for a number of User Boxes used for PC-FAX RX.
Printing a received fax
To print a fax saved in a User Box in PC-Fax RX, browse data in that User Box.
-
For details on how to print a fax saved in the Public, Personal, or Group User Box, refer to "User's Guide
[Box Operations]/[Store Documents as Files in MFP and Use Them Again When Necessary]".
-
For details on how to print a fax saved in the Memory RX User Box, refer to "User's Guide [Box Oper-
ations]/[Receive Fax in Memory and Print It Later (Memory RX)]".
Receiving Options
6
6-13