[Sequential Tx Report]; [Timer Reservation Tx Report]; [Confidential Rx Report]; [Bulletin Tx Report] - Muratec MFX-C2280 Fax Manual

Settings
[OFF]

[Sequential TX Report]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [Sequential TX Report]
Select whether to print a report containing results of faxes sent by polling and broadcast.
[ON] is selected by default.

[Timer Reservation TX Report]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [Timer Reservation TX Re-
port]
Select whether to print a report when transmission is reserved using the Timer TX function.
[ON] is selected by default.

[Confidential Rx Report]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [Confidential Rx Report]
Select whether to print a report containing the results of confidential faxes received.
[ON] is selected by default.

[Bulletin TX Report]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [Bulletin TX Report]
Select whether to print a report containing records of faxes registered with the bulletin for being received by
polling.
[ON] is selected by default.

[Relay TX Result Report]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [Relay TX Result Report]
Select whether to print a report containing results of faxes sent by relay distribution.
[ON] is selected by default.

[Relay Request Report]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [Relay Request Report]
Select whether to print the report when the machine has received a fax (Relay RX) as a relaying station.
[ON] is selected by default.

[PC-Fax TX Error Report]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [PC-Fax TX Error Report]
Select whether to print a report if PC-Fax TX using the fax driver has failed.
[OFF] is specified by default.

[Broadcast Result Report]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [Broadcast Result Report]
Select whether to combine results of broadcast on all destinations involved or list them for each destination.
[All Destinations] is specified by default.

[TX Result Report Check]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [TX Result Report Check]
Description of Setup Buttons (Administrator Settings)
Description
The report is not printed.
11
11-30