[F-Code Tx] - Muratec MFX-C2280 Fax Manual

[F-Code TX]

To display: [Scan/Fax] - [Application] - [Fax Setting] - [F-Code TX]
To use Confidential TX or Relay Distribution, enter an F code (SUB address and sender ID) and send it.
F code is a communication procedure that is standardized by CIAJ (Communications and Information Net-
work Association of Japan). Confidential TX and Relay Distribution are available if a remote machine supports
F-code communications.
Settings
[ON]/[OFF]
[SUB Address]
[Sender ID]
Description of Setup Buttons
Description
Select [ON] to specify F-Code TX.
Enter a SUB address.
• To use Confidential TX, enter the Confidential User Box number pro-
grammed for the destination.
• To use relay distribution, enter the Relay User Box number pro-
grammed for the destination.
Enter a sender ID.
• To use Confidential TX, enter the communication password for Confi-
dential RX that is programmed for the destination.
• To use relay distribution, enter the Relay User Box password pro-
grammed for the destination.
9
9-27