Split The Left And Right Pages Of A Book And Catalog ([Book Original]); Scanning A Number Of Originals Into Several Batches ([Separate Scan]) - Muratec MFX-C2280 Fax Manual

Hide thumbs Also See for MFX-C2280:
Table of Contents

Advertisement

3.6
Option Settings for Fax TX

Split the left and right pages of a book and catalog ([Book Original])

You can scan two-page spreads such as books and catalogs separately into the left and right pages, or scan
them as one page. If you place a book or catalog on the Original Glass, you do not need to close the ADF
to scan it.
For details, refer to page 9-14.

Scanning a number of originals into several batches ([Separate Scan])

If the number of original sheets is so large that they cannot be loaded into the ADF at the same time, you can
load them in several batches and handle them as one job.
In [Separate Scan], you can switch between ADF and Original Glass to scan the originals.
1
Load the original.
NOTICE
Do not load more than 100 sheets at a time into the original tray, and do not load the sheets up to the
point where the top of the stack is higher than the , mark. Doing so may cause an original paper jam,
damage the originals, and/or cause an ADF failure.
2
Tap [Application] - [No. of Originals] - [Separate Scan], and set to [ON].
3
Press the Start key.
The original is scanned.
How To Send a Fax
3
3-22

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfx-2880Mfx-3680

Table of Contents