[Original Direction]; [Book Original] - Muratec MFX-C2280 Fax Manual

[Original Direction]

To display: [Scan/Fax] - [Application] - [No. of Originals] - [Original Settings] - [Original Direction]
Specify the orientation of the loaded original.

[Book Original]

To display: [Scan/Fax] - [Application] - [No. of Originals] - [Book Original]
You can scan two-page spreads such as books and catalogs separately into left and right pages, or scan
them as one page.
If you place a book or catalog on the Original Glass, you do not need to close the ADF to scan it.
Settings
[ON]/[OFF]
[Output Method]
[Binding Position]
Description of Setup Buttons
Description
Select [ON] to specify Book Original.
Specify the scanning method for book spread originals.
• [Book Spread]: Scans a book spread original as it is.
• [Separation]: Scan the right and left pages of two-page spreads sepa-
rately in the order of the page numbers.
• [Front Cover]: Scans the front cover and two-page spreads according
to the page order of the original (scans the front cover first and then
two-page spreads).
• [Front & Back Covers]: Scans the front and back covers and two-page
spreads according to the page order of the original (scans the front
cover first, then the back cover, followed by two-page spreads).
If [Separation], [Front Cover] or [Front & Back Covers] is selected for [Out-
put Method], select the spreading direction of the original to be scanned.
Select [Left Bind] for two-page spreads of left binding, and [Right Bind] for
two-page spreads of right binding.
Note that if the binding position is incorrectly specified, the page order of
the two-page spread is reversed between the left- and right-hand pages.
9
9-14