[Number Of Redials]; [Redial Interval]; [Line Monitor Sound]; [Line Monitor Sound Volume (Send)] - Muratec MFX-C2280 Fax Manual

[Number of Redials]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [Number of Redials]
If the machine fails to send a fax successfully, it automatically redials the same destination after the elapse
of a certain period of time. If necessary, change the number of redials.
(The setting range varies according to the local standards.)

[Redial Interval]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [Redial Interval]
If necessary, change the redial intervals when you specified a value in [Number of Redials].
[3 min.] minutes is selected by default.

[Line Monitor Sound]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [Line Monitor Sound]
Select whether to monitor sounds on the telephone line during fax communication.
[OFF] is specified by default.

[Line Monitor Sound Volume (Send)]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [Line Monitor Sound
Volume (Send)]
Monitors sounds output from the machine. Specify the monitor sound volume between 0 and 31.
This function is available only when [Line Monitor Sound] is set to [ON].
[10] is specified by default.
Tips
- When communicating with fax, monitoring sound is generated even if send or receive monitoring sound
of this machine is set to [0] since the sound is generated both on this machine and on the destination
side. For setting to mute, set both [Line Monitor Sound Volume (Send)] and [Line Monitor Sound Volume
(Receive)] to [0], or set [Line Monitor Sound] to [OFF].

[Line Monitor Sound Volume (Receive)]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [Line Monitor Sound
Volume (Receive)]
Monitors sounds output from the recipient, including switching equipment or TA. Specify the monitor sound
volume between 0 and 31.
This function is available only when [Line Monitor Sound] is set to [ON].
[20] is specified by default.
Tips
- When communicating with fax, monitoring sound is generated even if send or receive monitoring sound
of this machine is set to [0] since the sound is generated both on this machine and on the destination
side. For setting to mute, set both [Line Monitor Sound Volume (Send)] and [Line Monitor Sound Volume
(Receive)] to [0], or set [Line Monitor Sound] to [OFF].

[TX/RX Settings]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings]
Specify how to print faxes received and how to handle files in a polling transmission.
Settings
[Duplex Print (RX)]
Description of Setup Buttons (Administrator Settings)
Description
Select whether to print an original on both sides of sheets of paper when a
fax having multiple pages is received.
For details on settings, refer to page 11-21.
11
11-20