4.4
Sending a Fax at a Preset Time
Operation flow
1
Load the original.
2
Tap [Scan/Fax].
3
Specify the destination.
% You can specify multiple destinations at the same time.
4
Tap [Application] - [Fax Setting] - [Timer TX], then tap [ON].
5
Using the Keypad, enter the transmission start time, then tap [OK].
6
Press the Start key.
Scanning of the original starts. The fax is automatically sent at the specified time.
Tips
-
If the machine power is not activated at the start time, fax transmission will not start. The fax transmis-
sion starts just after the machine power is turned on.
Sending Options
4
4-8