[Mixed Original] - Muratec MFX-C2280 Fax Manual

Settings
[Original Setting]
[Despeckle]
[Blank Page Removal]
[Binding Position]
[Original Direction]

[Mixed Original]

To display: [Scan/Fax] - [Application] - [No. of Originals] - [Original Settings] - [Mixed Original]
Even for an original with pages of different sizes, by using ADF, you can scan data while detecting the size
for each page. If the widths of the originals are the same, select [Same Width]. If the widths of the originals
are different, select [Different Width].
Description of Setup Buttons
Description
Configure the setting so as to scan originals accurately according to the
properties of the originals to be loaded.
• [Mixed Original]: Even for an original with pages of different sizes, by
using ADF, you can scan data while detecting the size for each page.
For details, refer to page 9-10.
• [Thin Paper Original]: Reduce the original feed speed of the ADF to pre-
vent the original from getting caught. For details, refer to page 9-11.
• [Z-Folded Original]: Even the original sizes of folded originals can be
detected accurately. For details, refer to page 9-11.
• [Long Original]: Select this option when loading a long original which is
larger in the feeding direction than full standard size (11 e 17 or A3). For
details, refer to page 9-12.
Scan an original using the ADF while removing dust from the Slit Scan
Glass.
For details, refer to page 9-12.
Blank pages contained in the original loaded into the ADF are skipped
when the original is scanned.
For details, refer to page 9-13.
When scanning a double-sided original, select the original binding position
to prevent the binding positions being reversed between the front and rear
faces.
For details, refer to page 9-13.
Specify the orientation of the loaded original.
For details, refer to page 9-14.
9
9-10