Table of Contents
Advertisement
Replacing the Bluetooth module
Tools you need to complete this task:
v
Screws removed during this task:
To replace the Bluetooth module:
1
2
3
4
5
6
www.gateway.com
Flat-blade driver
Phillips #0 screwdriver
1 black 2.5*3.0 (DVD
drive)
3 black 2.5*3.0 (Palm
rest-DVD drive bay)
3 black 2.5*6.0 (Palm
rest-top)
Complete the steps in
"Preparing the convertible notebook" on page
Remove the memory bay cover by following the steps in
modules" on page
6.
Remove the wireless bay cover by following the steps in
card" on page
10.
Remove the DVD drive by following the steps in
Remove the hard drive by following the steps in
Remove the palm rest by following the steps in
- OR -
2 black 2.5*3.0 (hard
drive)
3 black 2.5*2.2 (Palm
rest-hard drive bay)
"Adding or replacing memory
"Replacing the IEEE 802.11 wireless
"Replacing the DVD drive" on page
"Replacing the hard drive" on page
"Replacing the palm rest" on page
Scribe or non-marring tool
2 black 2.0*6.0 (Palm
rest-bottom)
7 black 2.5*4.5 (Palm
rest-bottom)
5.
14.
17.
25.
29
Advertisement
Table of Contents
