Table of Contents
Advertisement
12
Carefully separate the front and back of the LCD panel assembly.
Caution
The fingerprint reader cable connects the two halves. Lay the front of the LCD
panel assembly beside the back half.
13
Remove the four screws that connect the indicator/button board to the LCD panel assembly
back.
Screw
14
Lift the indicator/button board off of the LCD panel assembly back, then turn it over.
15
Disconnect the two cables from the old indicator/button board.
16
Connect the two cables to the new indicator/button board.
17
Replace the indicator/button board, then replace the four screws removed in
18
Press the two halves of the LCD panel front and back together in several places until they
click in place. You should find no loose spots or spots where the two halves do not meet.
19
Replace the eight LCD panel assembly screws removed in
20
Replace the eight rubber inserts removed in
www.gateway.com
Screw
Step
Screw
Screw
Step
11.
10.
Step
13.
69
Advertisement
Table of Contents
