Table of Contents
Advertisement
9
10
11
12
13
14
15
16
34
Replacing Convertible Notebook Components
Remove the old USB/Firewire board from the convertible notebook.
Place the new USB/Firewire board into the convertible notebook. The holes in the board
should fit around the posts in the bay.
Connect the USB/Firewire cable to the USB/Firewire board.
Replace the palm rest by following the steps in
Replace the hard drive by following the steps in
Replace the DVD drive by following the steps in
Replace the wireless bay cover by following the steps in
card" on page
10.
Replace the memory bay cover by following the steps in
modules" on page
6.
"Replacing the palm rest" on page
"Replacing the hard drive" on page
"Replacing the DVD drive" on page
"Replacing the IEEE 802.11 wireless
"Adding or replacing memory
25.
17.
14.
Advertisement
Table of Contents
