CHAPTER 1: About This Reference MPC contact information Important The labels shown in this section are for informational purposes only. Label information varies by model, features ordered, and location. MPC model and serial number The label on the bottom of your notebook contains information that identifies your notebook model and its features.
CHAPTER 2: Checking Out Your Notebook Front Power indicator Battery charge indicator Component Icon Description Power indicator LED on - Notebook is on. LED blinking - Notebook is in Sleep or Hybrid Sleep mode. LED off - Notebook is off. Battery charge LED blue - Battery is fully charged.
www.mpccorp.com Left Memory card reader Power connector PC Card slot Monitor port Ventilation fan Docking port Component Icon Description Power connector Plug the AC adapter cable into this connector. Monitor port Plug an analog VGA monitor or projector into this port. For more information, see “Viewing the display on a projector or monitor”...
CHAPTER 2: Checking Out Your Notebook Right Kensington lock slot Ethernet Modem Microphone jack USB ports jack jack Headphone jack IEEE 1394 port Component Icon Description USB ports Plug USB devices (such as a CD or DVD drive, diskette drive, flash drive, printer, scanner, camera, keyboard, or mouse) into these ports.
www.mpccorp.com Bottom Memory bay Battery latch Battery Speaker Speaker Ventilation fan Hard drive Customer care label Component Icon Description Hard drive The hard drive is located in this bay. For more information, see “Replacing the hard drive kit” on page Speakers Provide audio output when headphones or amplified speakers are not plugged in.
Page 14
CHAPTER 2: Checking Out Your Notebook Component Icon Description Ventilation Helps cool internal components. Warning: Do not work with the notebook resting on your lap. If the air vents are blocked, the notebook may become hot enough to harm your skin. Caution: Do not block or insert objects into these slots.
www.mpccorp.com Keyboard area Power button Keyboard Status indicators Touchpad Component Icon Description Power button Press to turn the power on or off. You can also configure the power button for Sleep/Resume mode. Keyboard Provides all the features of a full-sized, computer keyboard.
CHAPTER3 Setting Up and Getting Started • Working safely and comfortably • Connecting the AC adapter • Connecting the dial-up modem • Connecting to a broadband modem or network • Starting your notebook • Using the status indicators • Using the keyboard •...
CHAPTER 3: Setting Up and Getting Started Working safely and comfortably Before using your notebook, follow these general guidelines for setting up a safe and comfortable work area and avoiding discomfort and strain: • Keep hands and arms parallel to the floor. •...
www.mpccorp.com Setting up your computer desk and chair When you are setting up your computer desk and chair, make sure that the desk is the appropriate height and the chair helps you maintain good posture. • Select a flat surface for your computer desk. •...
CHAPTER 3: Setting Up and Getting Started Connecting the AC adapter You can run your notebook using an AC adapter or your notebook’s battery. The battery was shipped to you partially charged. You should use the AC adapter right away to fully charge the battery.
www.mpccorp.com Connect the AC adapter to your notebook’s power connector. Plug the power cord into a wall outlet. The battery charge indicator turns on (see “Front” on page 4 for the location of the battery charge indicator). If the battery charge indicator does not turn on, complete the following steps until it turns on: Unplug the adapter from your notebook, then plug it...
CHAPTER 3: Setting Up and Getting Started Connecting the dial-up modem Your notebook has a built-in 56K modem that you can use to connect to a standard telephone line. Warning To reduce the risk of fire, use only No. 26 AWG or larger (for example, No.
www.mpccorp.com Connecting to a broadband modem or network Your notebook has a network jack that you can use to connect to a cable or DSL modem or to a wired Ethernet network. To connect to a cable or DSL modem or to a wired Ethernet network: Insert one end of the network cable into the network jack...
CHAPTER 3: Setting Up and Getting Started Starting your notebook Warning Do not work with the notebook resting on your lap. If the air vents are blocked, the notebook may become hot enough to harm your skin. Caution Provide adequate space around your notebook so air vents are not obstructed.
www.mpccorp.com Using the status indicators Important If none of the indicators are on, you may need to press F +F1 to toggle the status indicators on. Status indicators inform you when a drive is being used or when a button has been pressed that affects how the keyboard is used. The status indicators are located below the touchpad.
CHAPTER 3: Setting Up and Getting Started Indicator Icon Description Battery LED blue - Battery is fully charged. charge LED purple - Battery is charging. LED blinking red - Battery charge is very low. LED solid red - Battery is malfunctioning.
Page 27
www.mpccorp.com You can attach an external keyboard to the notebook or optional port replicator using a USB port. You do not need to shut down the notebook to connect a USB keyboard.
CHAPTER 3: Setting Up and Getting Started Key types The keyboard has several different types of keys. Some keys perform specific actions when pressed alone and other actions when pressed in combination with another key. Key type Icon Description Function keys Press these keys labeled F1 to F11 to perform actions in programs.
www.mpccorp.com System key combinations When you press the F key and a system key at the same time, your notebook performs the action identified by the text or icon on the key. Press and hold To... , then press this system key... Toggle the status indicators on or off.
Page 30
CHAPTER 3: Setting Up and Getting Started Press and hold To... , then press this system key... Turn the optional Bluetooth radio on or off. Warning: Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane.
www.mpccorp.com Using the EZ Pad touchpad The EZ Pad™ consists of a touchpad and two buttons. Touchpad Left button Right button When you move your finger on the touchpad, the pointer (arrow) on the screen moves in the same direction. You can use the EZ-Pad left and right buttons below the touchpad to select objects.
Page 32
CHAPTER 3: Setting Up and Getting Started To... Do this... Move the Move your finger pointer on the around on the screen. touchpad. If you run out of space and need to move the pointer farther, lift your finger, move it to the middle of the touchpad, then continue moving...
www.mpccorp.com To... Do this... Move an Position the object on the pointer over the screen. object. Press the left button and hold it down, then use the touchpad to move (drag) the object to the appropriate part of the screen. Release the button to drop the object where you want it.
CHAPTER 3: Setting Up and Getting Started IEEE 802.11 wireless network radio Your notebook may have an IEEE 802.11 radio for communicating with other computers on a wireless Ethernet network. To turn the wireless IEEE 802.11 radio on or off: •...
CHAPTER4 Using Drives and Accessories • Using the memory card reader • Adding and removing a PC Card • Installing a printer or other peripheral device • Viewing the display on a projector or monitor • Ordering accessories...
CHAPTER 4: Using Drives and Accessories Using the memory card reader You can use memory cards to transfer pictures from a digital camera to your notebook. You can also use the memory card reader to transfer data between your notebook and a device that uses memory cards, such as a PDA, MP3 player, or cellular telephone.
www.mpccorp.com Adding and removing a PC Card Your notebook has a PC Card slot (also known as a PCMCIA card slot). This slot accepts one Type II card. You do not need to restart your notebook when changing most cards because your notebook supports hot-swapping.
Page 38
CHAPTER 4: Using Drives and Accessories Eject the PC Card by pressing the eject button again.
www.mpccorp.com Installing a printer or other peripheral device Your notebook or optional port replicator has one or more of ® the following ports: IEEE 1394 (also known as Firewire ® i.Link ) and Universal Serial Bus (USB). You use these ports to connect peripheral devices such as printers, scanners, and digital cameras to your notebook.
CHAPTER 4: Using Drives and Accessories To connect your USB device to your notebook: Connect one end of the USB cable to your device. Connect the other end of the cable to a USB port your notebook. For the location of the USB ports on your notebook, see “Right”...
www.mpccorp.com Viewing the display on a projector or monitor You can use your notebook for giving presentations by connecting an external monitor or projector to your monitor (VGA) port. Your notebook supports simultaneous LCD and external display. Simultaneous display lets you control the presentation from your notebook at the same time as you face your audience.
CHAPTER 4: Using Drives and Accessories Ordering accessories To order accessories, click the Parts and Peripherals link at www.mpccorp.com. Accessories may not be available in all localities. Automobile/airplane power adapters With an automobile/airplane power adapter, you can save battery power by plugging your notebook into an automobile cigarette lighter or an airplane in-flight power receptacle.
Page 43
www.mpccorp.com Printers You can attach almost any type of printer to your notebook. The most common types are inkjet and laser printers, which print in color or black and white. Inkjet printers and cartridges are relatively inexpensive, but they are slower than laser printers. Using an inkjet color printer, you can print pictures, banners, and greeting cards, as well as documents.
Page 44
CHAPTER 4: Using Drives and Accessories...
CHAPTER 5: Managing Power Recharging the battery The battery recharges while it is installed and your notebook is connected to AC power. While the battery recharges, the battery charge indicator turns on. Changing the battery Replacing the battery Warning Danger of explosion if battery is incorrectly replaced. Replace only with a battery specifically manufactured for your MPC notebook.
www.mpccorp.com Press in the small square button on the battery release latch, slide the latch in the direction shown, then slide the battery out of your notebook. Slide a recharged battery into the notebook until it snaps into place.Slide the battery latch to the locked position. Slide the battery latch to the locked position.
CHAPTER 5: Managing Power Important If, after completing this procedure, the battery charge indicator still does not show an accurate charge, contact MPC Customer Care. Getting the most from your battery Maximizing battery performance To get maximum performance from your notebook battery, we recommend that you initially condition (fully charge and discharge) your new battery a few times during the first several weeks of use, to let it reach its maximum rated capacity.
www.mpccorp.com • Use the notebook touchpad instead of an external mouse. • Decrease or mute speaker volume. • Turn off all scheduled tasks. • Turn off auto-save features in Microsoft Office and other applications. • Copy programs from CDs or DVDs to the hard drive so you do not use battery power by running external optical drives.
CHAPTER6 Traveling with Your Notebook • Packing your notebook • Traveling by air • Dial-up modem • Radio frequency wireless connections • Files • Security • Power • Additional tips...
CHAPTER 6: Traveling with Your Notebook Packing your notebook • Remove all peripheral devices and cables. Remember to pack those you will need while traveling (including your external CD or DVD drive). • Pack your notebook securely into a briefcase or hand-carried luggage, and keep it separate from toiletries, liquids, and food.
www.mpccorp.com Radio frequency wireless connections Important If your notebook came equipped with an internal embedded wireless device, see “Legal Information” on page 93 for general wireless regulatory guidelines. • Every country has different restrictions on the use of wireless devices. If your notebook is equipped with a wireless device, check with the local radio approval authorities prior to your trip for any restrictions on the use of a wireless device in the destination country.
CHAPTER 6: Traveling with Your Notebook Security • Get a locking cable for your notebook so you can attach a cable lock and leave your notebook in your hotel room while you are away. • Always keep your notebook with you while waiting in airports, train stations, or bus terminals.
www.mpccorp.com Highlight Password on boot, then press E NTER Highlight Enabled, then press E NTER Open the Exit menu, highlight Exit Saving Changes, then press E NTER When you start your computer, you are prompted to enter the user password you set in Step Power •...
Page 56
CHAPTER 6: Traveling with Your Notebook...
CHAPTER7 Maintaining Your Notebook • Caring for your notebook • Cleaning your notebook • Maintaining the battery • Cleaning CDs or DVDs • Recovering your system...
CHAPTER 7: Maintaining Your Notebook Caring for your notebook To extend the life of your notebook: • Be careful not to bump or drop your notebook, and do not put any objects on top of it. The case, although strong, is not made to support extra weight.
www.mpccorp.com Cleaning your notebook Keeping your notebook clean and the vents free from dust helps keep your notebook performing at its best. You may want to gather these items and put together a notebook cleaning kit: • A soft, lint-free cloth •...
CHAPTER 7: Maintaining Your Notebook Cleaning the keyboard You should clean the keyboard occasionally by using an aerosol can of air with a narrow, straw-like extension to remove dust and lint trapped under the keys. If you spill liquid on the keyboard, turn off your notebook and turn the notebook upside down.
www.mpccorp.com Using the right charger is important. By now you probably know that each kind of battery has its own technology, its own rate of charge, and so on. Charging lithium batteries correctly is one way to extend their life and to avoid damage. Clean the gold or silver connector on the battery (the part of the battery that makes contact with the notebook) with alcohol or electronic contact cleaner.
CHAPTER 7: Maintaining Your Notebook Cleaning CDs or DVDs Wipe from the center to the edge, not around in a circle, using a product made especially for the purpose. Recovering your system You can solve most computer problems by following the information in “Troubleshooting”...
Page 63
www.mpccorp.com Help For more information about using Microsoft System Restore, click Start, then click Help and Support. Type windows system restore in the Search Help box, then press E NTER To restore using Microsoft System Restore: Click (Start), Control Panel, System and Maintenance, then click Backup and Restore Center.
Page 64
CHAPTER 7: Maintaining Your Notebook Manually creating a restore point To manually create a restore point: Click (Start), Control Panel, System and Maintenance, then click Backup and Restore Center. The Backup and Restore Center opens. On the left side of the window, click Create a restore point or change settings, then click Next.
CHAPTER 8: Upgrading Your Notebook Preventing static electricity discharge Warning To avoid exposure to dangerous electrical voltages and moving parts, turn off your notebook, unplug the power cord, modem cable, and network cable, and remove the battery before opening the case. Warning To prevent risk of electric shock, do not insert any object into the vent holes of the notebook.
www.mpccorp.com Adding or replacing memory modules Important Use only memory modules designed for your MPC notebook. Tools You need a small Phillips screwdriver to replace memory modules. Your notebook uses memory modules called SO-DIMMs (Small Outline Dual Inline Memory Modules). The modules are available in various capacities and any module can be placed in any slot.
Page 68
CHAPTER 8: Upgrading Your Notebook Loosen the captive memory bay cover screw (this screw cannot be removed), then remove the cover. Screw Gently press outward on the clip at each end of the memory module until the module tilts upward. Clip Clip Pull the memory module out of the slot.
Page 69
www.mpccorp.com Hold the replacement module at a 30-degree angle and slide it into the empty memory slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the memory bay.
CHAPTER 8: Upgrading Your Notebook Replacing the hard drive kit Tools You need a small Phillips screwdriver to replace the hard drive kit. If you would like more hard drive capacity, you can replace your original drive with a higher-capacity drive. Hard To replace the hard drive kit: Create a Drivers and Applications Recovery disc.
Page 71
www.mpccorp.com Remove the two hard drive bay cover screws. Screw Screw Slide the hard drive bay cover, then remove it. The hard drive is attached to the back of the cover. Remove the screws on the side of the hard drive that secure the hard drive to the hard drive cover.
Page 72
CHAPTER 8: Upgrading Your Notebook Replace the metal shield. Replace the screws that secure the cover to the drive. Slide the new hard drive into your notebook, then replace the cover screws. Insert the battery then turn your notebook over. Connect to the optional port replicator.
CHAPTER 9: Troubleshooting Safety guidelines Warning Do not try to troubleshoot your problem if power cords or plugs are damaged, if your notebook was dropped, or if the case was damaged. Instead, unplug your notebook and contact a qualified computer technician. For more information about preventing damage from static electricity, “Preventing static electricity discharge”...
www.mpccorp.com • If a peripheral device (such as a keyboard or mouse) does not work, make sure that all connections are secure. • Make sure that your hard drive is not full. • If an error message appears on the screen, write down the exact message.
CHAPTER 9: Troubleshooting You see an “Access Denied” or “Write protect” error message • Move the write-protection tab in the upper-right corner of the diskette down (unprotected). • The diskette may be full. Delete unnecessary files on the diskette and try again. •...
www.mpccorp.com The screen resolution is not correct • Change the screen resolution from the Display Settings dialog box if the text on the display is dim or difficult to read • Adjust the brightness using the system keys or Windows Mobility Center.
Page 78
CHAPTER 9: Troubleshooting • Try a different disc. Occasionally discs are flawed and cannot be read by the drive. • Some music CDs have copy protection software. You may not be able to play these CDs on your notebook. • Your notebook may be experiencing some temporary memory problems.
www.mpccorp.com • Make sure that the disc’s regional code and your DVD drive’s regional code match. • Make sure that a DVD player program has been installed on your notebook. You cannot eject a CD or DVD Your notebook must be turned on to remove CDs and DVDs. If you do not want to turn on your notebook, manually eject the disc by inserting an opened paper clip into the manual eject hole.
CHAPTER 9: Troubleshooting Help For more information about file management, click Start, then click Help and Support. Type the keyword file management in the Search Help box, then press E NTER You see a “Data error” message This may be the result of a defective area on the hard drive. To fix hard drive problems, run the Error checking program.
www.mpccorp.com You see an “Unable to locate host” message and are unable to browse the Internet This problem can occur when you have typed a URL (Web address) incorrectly, you have lost your Internet connection, or your ISP is having technical difficulties. Double-check the URL or try a different URL.
CHAPTER 9: Troubleshooting • Remove all extension cables and switchboxes. • Clean the keyboard by using an aerosol can of air with a narrow, straw-like extension to remove dust and lint trapped under the keys. • Try a keyboard that you know works to make sure that the keyboard port works.
Page 83
www.mpccorp.com • Display type—The Media Center is best viewed on display devices that were offered with the Media Center computer when you purchased it from MPC. Other types of display devices, including retail TVs, may provide lower quality video. If you did not order a display device when you purchased your Media Center computer, a progressive scan display device with a VGA input is the best choice.
Page 84
CHAPTER 9: Troubleshooting • Type of TV (interlaced or progressive scan) Many TVs use interlaced video. Interlaced video displays a video frame with two passes of alternating scan lines. The TV screen first displays the video image odd lines one at a time, sequentially from top to bottom, then it fills in the other half of the video image with the even lines.
www.mpccorp.com You want to know whether you can play recorded videos on other computers • Yes, you can. A DVR-MS file recorded to DVD can be replayed on another Media Center computer or on a non-Media Center computer that has a DVD player and DVD decoder software (such as PowerDVD).
CHAPTER 9: Troubleshooting Memory card reader Drive letter for the memory card slot does not appear in the My Computer window • Reboot your notebook. Modem (cable or DSL) The modem does not connect • Make sure that the modem cable is plugged into the Ethernet network jack and not the modem jack.
Page 87
www.mpccorp.com Click the Phone and Modem Options. The Phone and Modem Options dialog box opens. Click the Dialing Rules tab. Click the location from which you are dialing, then click Edit. The Edit Location dialog box opens. Make sure that all settings are correct. •...
Page 88
CHAPTER 9: Troubleshooting Your 56K modem does not connect at 56K Current FCC regulations restrict actual data transfer rates over public telephone lines to 53K. Other factors, such as line noise, telephone service provider equipment, or ISP limitations, may lower the speed even further. If your notebook has a v.90 modem, the speed at which you can upload (send) data is limited to 33.6K.
www.mpccorp.com Click the Diagnostic tab, then click Query Modem. If information about the modem appears, the modem passed diagnostics. If no modem information is available, a white screen appears with no data, or if you get an error such as port already open or the modem has failed to respond, the modem did not pass diagnostics.
CHAPTER 9: Troubleshooting The external mouse does not work • Make sure that the mouse cable is plugged in correctly. • Shut down and restart your notebook. • Remove all extension cables and switch boxes. • Try a mouse you know is working to make sure that the mouse port works.
www.mpccorp.com Your wired Ethernet network is running slower than you expect • If your Ethernet network is running slower than you expect, check the speed of each Ethernet component. For best results, all Ethernet components should be standard Ethernet (10 Mbps), Fast Ethernet (100 Mbps or 10/100 Mbps), or Gigabit Ethernet (1000 Mbps or 10/100/1000 Mbps).
Page 92
CHAPTER 9: Troubleshooting Your connection on the network seems intermittent or your wireless network is running slower than you expect • The speed of a wireless network is related to signal strength. Signal strength is affected by the distance between your wireless network devices, by radio interference, and by interference from natural obstructions such as walls, ceilings, floors, and doors.
www.mpccorp.com Your wireless network is listed as a preferred network, but it has an “x” on it • An x means your preferred network is not currently available or you are not currently in range to connect. Internet Explorer is unable to access the Internet •...
CHAPTER 9: Troubleshooting PC Cards You installed an PC Card and now your notebook is having problems • Make sure that you have correctly installed required software for the PC Card. For more information, see your PC Card’s documentation. Pointing device “Touchpad or pointing device”...
www.mpccorp.com Printer Help For more information about printer troubleshooting, click Start, then click Help and Support. Type the keyword printer troubleshooting in the Search Help box, then press E NTER The printer will not turn on • Make sure that the printer is online. Many printers have an online/offline button that you may need to press.
CHAPTER 9: Troubleshooting If the printer status is Offline, right-click the name of the printer you want to use, then click Use Printer Online to set the printer to work online. • Wait until files have been printed before sending additional files to the printer.
www.mpccorp.com Touchpad or pointing device Touchpad or pointing device is not working • Make sure the touchpad or pointing device is turned on. The notebook is not responding when you click or tap on the touchpad or pointing device • Turn on the touchpad or pointing device.
Page 98
CHAPTER 9: Troubleshooting • If you have “how to” questions about using a program, see: • Online Help • Printed documentation • The Microsoft Windows documentation • The software publisher’s Web site • See the troubleshooting section of this chapter. Warning To avoid bodily injury, do not attempt to troubleshoot your notebook problem if:...
APPENDIX Legal Information • Important safety information • Regulatory compliance statements • Environmental information • Notices...
Page 100
APPENDIX A: Legal Information Important safety information Warning Always follow these instructions to help guard against personal injury and damage to your MPC system. Warning Do not use MPC products in areas classified as hazardous locations. Such areas include patient care areas of medical and dental facilities, oxygen-laden environments, or industrial facilities.
www.mpccorp.com • When the notebook is turned off, a small amount of electrical current still flows through the notebook. To avoid electrical shock, always unplug all power cables and modem cables from the wall outlets before cleaning the notebook. • Unplug the notebook from the wall outlet and refer servicing to qualified personnel if: •...
APPENDIX A: Legal Information Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, please contact your local Radio Approval agency for requirements.
Page 103
www.mpccorp.com The FCC has set a general guideline of 8 inches (20 cm) separation between the device and the body, for use of a wireless device near the body (this does not include extremities). This device should be used more than 8 inches (20 cm) from the body when wireless devices are on. The power output of the wireless device (or devices), which may be embedded in your notebook, is well below the RF exposure limits as set by the FCC.
Page 104
APPENDIX A: Legal Information California Proposition 65 Warning Warning This product contains chemicals, including lead, known to the State of California to cause cancer, birth defects or reproductive harm. Mercury Warning Warning The lamp in this display contains mercury. Do not put in trash. Recycle or dispose as hazardous waste Telecommunications per Part 68 of the Code of Federal Regulations (CFR 47) (applicable to products fitted with...
Page 105
www.mpccorp.com Caution To prevent radio interference to licensed service or co-channel Mobile Satellite systems, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Low power, Radio transmitter type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz band and/or 5.15 –...
APPENDIX A: Legal Information Telecommunications per Industry Canada CS-03 (for products fitted with an IC-compliant modem) The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operation, and safety requirements. The Department does not guarantee the equipment will operate to the users’ satisfaction.
www.mpccorp.com Laser safety statement Warning Use of controls or adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. To prevent exposure to laser beams, do not try to open the enclosure of a CD or DVD drive.
Index replacing bays AC adapter battery connecting hard drive connector memory international adapters Bluetooth accessories brightness purchasing adjusting safety precautions system keys acoustic handset coupler airplane power adapters application key cable lock arrow keys cable modem audio camera adjusting volume See digital camera headphone jack See digital video camera...
Page 110
Index printer keyboard projector LCD panel scanner notebook exterior speaker screen clicking video camera connecting copyright notice AC adapter dial-up modem external keyboard external monitor default printer keyboard dialing codes mouse dial-up modem printer digital camera projector memory card reader scanner USB port to cable modem...
Page 111
www.mpccorp.com using while traveling indicators electrostatic discharge (ESD) See status indicators EmPower power adapter inkjet printer ergonomics installing Ethernet battery connecting devices jack digital camera external monitor digital video camera EZ Pad touchpad hard drive See touchpad memory PC Card peripheral devices printer scanner...
Page 112
Index navigation using numeric keypad microphone power status jack Sleep Microsoft Certificate of Status Authenticity system Microsoft System Restore system key combinations model number toggle display modem Windows cable connecting dial-up labels Microsoft Certificate of international adapter Authenticity jack (dial-up) model number troubleshooting serial number...
Page 113
www.mpccorp.com status indicator button system key connector conserving battery power numeric keypad EmPower adapter status indicator extending battery life using Hybrid Sleep mode indicator international adapter opening management files Sleep mode folders source problems programs status box shortcut menu status indicator troubleshooting turning on notebook password...
Page 114
Index See installing adjusting muting right-clicking troubleshooting speakers built-in safety jack avoiding repetitive strain starting caring for notebook notebook general precautions programs guidelines for startup password troubleshooting posture static electricity reducing eye strain status indicators setting up computer battery charge static electricity Caps Lock scanner...
Page 115
www.mpccorp.com locating notebook moving pointer wireless network moving screen objects opening files, folders, and programs upgrading opening shortcut menu USB port right-clicking user password scroll zone selecting screen objects travel tips VGA port troubleshooting audio video diskette drive monitor port display projector port DVD drive...