Table of Contents
Advertisement
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
66
Replacing Convertible Notebook Components
Remove the old LCD hinge. Be careful to feed each cable individually through the hinge, with
the grey LCD cable last.
Feed the cables through the new LCD hinge, with the grey LCD cable first.
Place the new LCD hinge into the LCD lid.
Replace the screws removed in
Press the two halves of the LCD panel front and back together in several places until they
click in place. You should find no loose spots or spots where the two halves do not meet.
Replace the eight LCD panel assembly screws removed in
Replace the eight rubber inserts removed in
Replace the LCD assembly by following the steps in
Replace the system board by following the steps in
Replace the palm rest by following the steps in
Replace the hinge cover by following the steps in
Replace the hard drive by following the steps in
Replace the DVD drive by following the steps in
Reconnect the antenna wires to the wireless card by following the steps in
IEEE 802.11 wireless card" on page
Replace the memory bay cover by following the steps in
modules" on page
6.
Step
13.
Step
10.
"Replacing the LCD assembly" on page
"Replacing the system board" on page
"Replacing the palm rest" on page
"Replacing the hinge cover" on page
"Replacing the hard drive" on page
"Replacing the DVD drive" on page
10.
Step
11.
25.
"Replacing the
"Adding or replacing memory
51.
35.
23.
17.
14.
Advertisement
Table of Contents
