Replacing The System Board - Gateway E-155c Service Manual

Replacing the system board

Tools you need to complete this task:
v
Screws removed during this task:
To replace the system board:
1
2
www.gateway.com
Flat-blade driver
Phillips #0 screwdriver
2 black 2.0*3.0 (IEEE
802.11 wireless card)
2 black 2.0*6.0 (Palm
rest-bottom)
7 black 2.5*4.5 (Palm
rest-bottom)
Complete the steps in "Preparing the convertible notebook" on page
Remove the memory by following the steps in
page 6.
- OR -
1 black 2.5*3.0 (DVD
drive)
3 black 2.5*3.0 (Palm
rest-DVD drive bay)
3 black 2.5*6.0 (Palm
rest-top)
"Adding or replacing memory modules" on
Scribe or non-marring tool
2 black 2.5*3.0 (hard
drive)
3 black 2.5*2.2 (Palm
rest-hard drive bay)
3 black 2.5*4.5 (System
board)
5.
35