Table of Contents
Advertisement
Replacing the modem
Tools you need to complete this task:
v
Screws removed during this task:
To replace the modem:
1
2
3
42
Replacing Convertible Notebook Components
Flat-blade driver
Phillips #0 screwdriver
1 black 2.5*3.0 (DVD
drive)
3 black 2.5*3.0 (Palm
rest-DVD drive bay)
3 black 2.5*6.0 (Palm
rest-top)
2 black 2.0*3.0 (modem)
Complete the steps in
"Preparing the convertible notebook" on page
Remove the memory bay cover by following the steps in
modules" on page
6.
Disconnect the wireless antenna wires by following the steps in
wireless card" on page
10.
- OR -
2 black 2.5*3.0 (hard
drive)
3 black 2.5*2.2 (Palm
rest-hard drive bay)
3 black 2.5*4.5 (System
board)
"Adding or replacing memory
Scribe or non-marring tool
2 black 2.0*6.0 (Palm
rest-bottom)
7 black 2.5*4.5 (Palm
rest-bottom)
2 black 2.5*4.5 (modem/
audio cable shield)
5.
"Replacing the IEEE 802.11
Advertisement
Table of Contents
