5
Remove the hard drive by following the steps in
6
Remove the hinge cover by following the steps in
7
Remove the palm rest by following the steps in
8
Remove the system board by following the steps in
9
Remove the LCD assembly by following the steps in
10
Remove the six black and two silver rubber inserts from the front of the LCD panel assembly.
Rubber insert
Rubber insert
11
Remove the eight screws from the front of the LCD panel assembly.
Screw
Screw
www.gateway.com
Rubber insert
Rubber insert
Rubber insert
Rubber insert
Screw
Screw
Screw
Screw
"Replacing the hard drive" on page
"Replacing the hinge cover" on page
"Replacing the palm rest" on page
"Replacing the system board" on page
"Replacing the LCD assembly" on page
Rubber insert
Rubber insert
Screw
Screw
17.
23.
25.
35.
51.
55