Acl - Delphi Display Systems RDS-INSFTTCU Configuration And User's Manual

Delphi Display Systems, Inc. RDS-INSFTTCU

4.18 ACL

The Automatic Command Line (ACL) feature allows for
downloading and uploading to one or more timers
through the Software by creating a batch file that can be
used with third party programs such as MS Windows
Scheduler.
Important: You must configure each site individually
under Site Configuration using the Report Options (See -
section: Section 4.2 Site) with Raw Data DL.
New
Open
Save
Close
Raw Data DL
Parameters UL
FTImage UL
Set Time UL
Select All
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
Create a new ACL batch file
Opens a saved ACL batch file
Saves a new or edited ACL batch file
Closes this function
Downloads data from timer to create reports
Uploads unit parameters to timer from a saved unit parameters file (spd). Use
browse to select the file.
Uploads a new image to timer. Update the firmware to the latest version
released from Delphi Display Systems.
Sets the clock on the timer from the PC's clock. This will keep the timer and
PC's time in sync.
Selects all of the timers in the sites window. Clicking on a particular site will
select or deselect the site.
Confidential Document:
Copyright 2012. [Unpublished Work]. All rights reserved
Page 66 of 82