Table of Contents
Advertisement
Delphi Display Systems, Inc. RDS-INSFTTCU
4.12.6 Set Targets
NOTE: Unit Parameters is a simpler way to view and or configure the timer's parameters.
The Set Targets screen lets you create a system of target times, audible indicators (beeps), and letter
grades for any or all programmed event(s).
From STORE PARAMETERS Screen (See –
1. Click:
to select [TARGETS].
2. Click:
. You are now in the Set Targets
screen.
3. Click:
to move field to the [=] field.
4. Click:
or
vehicle detection point (MENU, GREET, WIN 1, WIN 2, LINE).
5. Click:
to move the field to DAY.
6. Click:
to move the field to [:] immediately to the right of DAY.
7. Click:
or
8. Click:
to move the field to [:] immediately to the right of DAYPARTS.
9. Click:
or
10. Click:
to move the field to BEEP.
11. Click:
to move the field to [=] immediately to the right of BEEP ON ARRIVAL.
12. Click:
or
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
Section 4.12
to select the desired
to select the desired day.
to select the desired dayparts.
to toggle the BEEP ON ARRIVAL option to YES or NO.
Confidential Document:
Copyright 2012. [Unpublished Work]. All rights reserved
Parameters Programming):
Page 57 of 82
Advertisement
Table of Contents
Need help?
Do you have a question about the RDS-INSFTTCU and is the answer not in the manual?