Remote Control Screens - Delphi Display Systems RDS-INSFTTCU Configuration And User's Manual

Delphi Display Systems, Inc. RDS-INSFTTCU

4.10.1 Remote Control Screens

This section describes the Fast Track
the Remote Control keypad to customize the Timer, as well as analyze the data it collects and stores. Once
you learn how to use a few of the screens, it will be easy for you to use all the others.
THE MENU SCREEN – YOUR GATEWAY TO THE FAST TRACK
CUSTOMIZATION AND REPORTING FEATURES
When the Timer was installed, it was configured to display the Activity screen and operate automatically,
producing the displays and automatic reports that your installer programmed. But you can also use the
Remote Control keypad to access the Menu screen and many other screens from the Activity screen.
®
Each Fast Track 3000 Series Timer Remote Control screen is briefly summarized below:
ACTIVITY SCREEN
VIEW PERIODS
VIEW TARGET TIMES
MENU
REMOVE CAR
RESET LOOP
PRINT HEADER
MANUAL REPORTS
SET PARAMETERS
DIAGNOSTICS
RESET MEMORY
Each screen is described in much greater detail in the following sections, with step-by-step instructions on
how to access and use each screen.
As you follow the instructions to display these screens, keep in mind that:

The starting point is the Activity screen (See –

Some screens and actions require a password.

Some screens are accessed from menu screens, from which you select an option that takes you to
another screen.
NOTE: In addition, the screens on the following pages are based on a standard default. Your screens
may vary somewhat depending on your particular configuration
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
®
3000 Series Timer's screens: how you can display them and use
"Home Base" for the Timer's operation
Shows current Dayparts and Shifts setting
Use to view goals and employee performance
"Gateway" to the Timer's powerful features
Use to manually clear event timers for a car that has left drive-thru
Use to manually reset internal vehicle detectors
NOT USED. Prints headings or titles on printer reports
Entry to the manual or customized reporting system
Used to customize the Timer to adapt to changing needs
Use to view the number of FTEvents and Pullouts
Erases all historical event data
Confidential Document:
Copyright 2012. [Unpublished Work]. All rights reserved
®
3000 SERIES TIMER' S POWERFUL
Section 4.10.2 Activity screen).
Page 33 of 82