Table of Contents
Advertisement
Delphi Display Systems, Inc. RDS-INSFTTCU
13. Click:
to select the grade (A, B, C, etc.) for which you wish to set or change the target
time. (If you do not want targeting for a particular grade, set the grade's target time to 0.)
NOTE: The target time for B must be equal to or greater than that for A; the target time for C must be
equal to or greater than that for B, and the same applies through the entire sequence of letter grades. The
Timer adjusts automatically to ensure this.Pass/Fail grading may be used rather than letter grading: Set all
letter grades except F to the same time – the maximum time allotted to the event (MENU, GREET, etc.) to
achieve a passing grade. For example, if you want to make 10 seconds the (Pass) time, set A, B, C, and D
to a time of 10 (the selected event must occur within this amount of time in order to "pass.").
14. Click:
to move the field immediately to the left of the B (beep) column field.
15. Click:
or
will beep (the number of times specified for the grade, A = 1 or 0 beeps, B = 2 or 0 beeps, C = 3
or 0 beeps, D = 4 or 0 beeps and F = 5 or 0 beeps) when the selected event exceeds the target
time you have selected.
16. Click:
to move the field immediately to the left of the P (print) column field. Make sure the
column is left unchecked.
17. Click:
or
18. Click:
to move the field to the field that begins F REPEAT.
19. Click:
to move the field to the field just to the right of @.
20. Click:
or
Display will sound two successive short beeps at intervals of 2, 5, 10, 15, or 30 seconds depending
on your choice. (Select OFF to disable the repeat beep.)
21. Click:
to move the field immediately to the left of DAYS.
to move the field to [A] (A means "All"), or to any of the days to the right.
22. Click:
23. Click:
or
Your selections are now highlighted.
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
to set the beep count for the grade you have chosen. The Remote
to toggle the printing option for the grade to N (no)
to set the number of times you want the beep to repeat. The Remote
to select the days to which you wish to copy the targets you have set.
Confidential Document:
Copyright 2012. [Unpublished Work]. All rights reserved
Page 58 of 82
Advertisement
Table of Contents
Need help?
Do you have a question about the RDS-INSFTTCU and is the answer not in the manual?