Delphi Display Systems RDS-INSFTTCU Configuration And User's Manual page 56

Delphi Display Systems, Inc. RDS-INSFTTCU
4. Click: or
5. Click: to move to an existing shift you would like to modify. (You may use up to four shifts
per day.)
6. Click: or
change the START or STOP times.
7. Click: or
automatically to prevent time gaps or overlaps.
NOTE: The ending time of each shift coincides with the starting time of the next shift for the same day,
though you may use different shifts for each day of the week. Shift 1 always starts at the opening time for the
day, and the last programmed shift always ends at the closing time for the day.
8. Click:
unused shift number (for which START and STOP times have not yet been entered).
9. Click: or
10. Click: or
field of the first shift – in order from top (1) to bottom (4) – you wish to remove.
11. Click: to delete the shift. Any shifts that follow will automatically be removed as well.
And the store's closing time will automatically be entered in place of the STOP time for the last
remaining shift
12. NOTE: If all days use the same shifts, you can set the shifts for only one day and then use the
COPY TO feature to copy the same settings to all other days, as explained in the following steps.
13. Click:
14. Click: or
15. Click: to move field to COPY.
16. Click: to move the field to <ENTER>.
17. Click: to copy the displayed shift settings to all other days, replacing any individual shifts
previously set for these days.
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
to move the day forward or backward.
or or
to change the time in 15-minute increments. The Timer adjusts
to add a new shift by moving the field immediately to the right of the first
to add the shift. The START and STOP times are now entered.
or or
to move the field immediately to the right of the DAY:.
to select the desired day from which to copy.
Confidential Document:
Copyright 2012. [Unpublished Work]. All rights reserved
to move field to the [=] or [-] fields to
to delete shifts by moving the field to the [=]
Page 56 of 82