Delphi Display Systems, Inc. RDS-INSFTTCU
4.9 Disconnect
When you select Disconnect from the Menu Bar you are disconnecting from the session with your Fast
®
Track
Timer. The Disconnect in the Menu Bar becomes inactive and the Connect in the Menu Bar
becomes active.
4.10 Remote Control
The Software application lets you
manage your Fast Track
your PC. When you select Remote
Control from the Menu Bar a new
window along with the Connect to Site
dialog box opens up. Select the site you
want to run a Remote Control session
with then click Connect and OK to
dismiss the Connect to Site dialog box
–Section 4.8
(See
Connect).
The Remote Control dialog box displays
®
the Fast Track
Timer site that you are
currently connected to.
The display to the right of the site you're
connected to shows the Activity screen
®
of the Fast Track
Timer in real time.
L1 through L8 are detection points.
When Active (Red State) show the
location of vehicle(s) in the Drive-Thru.
Not all Drive-Thru stores are configured
the same so, some detection points are not being used. (See -
The Remote Control keypad is used to guide you through the Remote Control screens to access different
functions and commands for the Fast Track
®
Track
Timer by moving the pointer over to the desired button of the keypad and clicking.
The Print LCD allows you to print what is currently displayed on the Remote Control screen to your
default local or network printer.
EXIT closes the Remote Control dialog box while maintaining your connection.
The following pages will guide you with each screen and proper usage for manual operation.
NOTE: Most of the operation performed in Remote Control can be easily done through Site Parameters.
(See –
Section 4.5
Unit Parameters.)
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
®
Timer(s) from
®
Timer. Your mouse pointer is used to operate the Fast
Confidential Document:
Copyright 2012. [Unpublished Work]. All rights reserved
Section 2.6
LED Status Lights.)
Page 32 of 82
Need help?
Do you have a question about the RDS-INSFTTCU and is the answer not in the manual?