Site Parameters - Delphi Display Systems RDS-INSFTTCU Configuration And User's Manual

Delphi Display Systems, Inc. RDS-INSFTTCU
OK
Cancel
Parameters
Connect
Disconnect
Get From Unit
Link Send/Get
Send to Unit
Save to Disk

4.6 Site Parameters

Click Parameters in the Unit Parameters window to open Site Parameters.
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
Closes Unit Parameters window
Cancels the unit parameters function
Used to view/edit parameters settings from a timer or saved .spd file.
Connects to a timer you have selected from site.
Disconnects the session from the timer.
Gets the parameters from the timer you are connected to display and/or edit.
When checked sends parameter changes to timer / gets parameters from
timer and stores it as a .dat file in the directory of the timer.
Sends parameter changes that you have made and selected to timer.
Saves the timers parameters as an .spd file.
Confidential Document:
Copyright 2012. [Unpublished Work]. All rights reserved
The caution box surrounding the check box
for Drive-thru Config and the Event
Labeling/Multi-Station Config is a warning to
the user that the Fast Track
can be distorted when the new configuration
of selected box is checked if uploaded to the
®
Fast Track Timer during operational hours.
The best time to upload this information is
during the hours that the drive-thru is closed.
Page 23 of 82
®
Timer's data