Delphi Display Systems RDS-INSFTTCU Configuration And User's Manual page 10

Delphi Display Systems, Inc. RDS-INSFTTCU

Show the elapsed time for a selected event in progress.

Show the average event time for a selected time period (indicated by flashing mode).

Show the same information on more than one Display (example: one Remote for your cashier
and customers, and another for your cooks).

Communicate information through audible beeps (example: a car arrives at a station).
The fifth & sixth addressed Remote Display is a Special Percentage Remote that may be programmed to:

Show the percentage of cars that satisfy the A-grade target time on any selected event.

The optional Remote Display setting serves as a special percentage Remote Display that can be
used to monitor speed service, as well as to provide performance incentive for crewmembers.
The percentage Remote Display shows, in either green or red digits, the percentage of cars
satisfying the particular grade's target time is below a percentage selected by the user; the
Remote Display's digits will be red. If the percent is equal to or higher than the selected
percentage, the digits will be green. Only the two color Remote Displays have this capability
(older remotes are only a single red color). The percentage Remote Displays will display the A
target only, while the other Remote Displays 1 through 4 will allow you to specify any target grade
you wish.
Time in Minutes and Seconds
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
Time in Seconds only
Confidential Document:
Copyright 2012. [Unpublished Work]. All rights reserved
Displaying Percentage of cars
In A-grade Target
Page 10 of 82