Set Printer Options; Set Remote Display Options - Delphi Display Systems RDS-INSFTTCU Configuration And User's Manual

Delphi Display Systems, Inc. RDS-INSFTTCU
24. Click: to move the field to the DAYPARTS field.
to move the field to [A] (A means "All"), or to any of the dayparts to the right.
25. Click:
26. Click: or
set. Your selections are now highlighted.
27. Click: to perform the specified copy operation. Repeat this procedure as needed for
different targeted events.
28. Click:
[DAYPART] fields.
29. Click: or
your settings.

4.12.7 Set Printer Options

This option is not used in the Fast Track
4.12.7.1

Set Remote Display Options

NOTE: Unit Parameters is a simpler way to view and or configure the timer's parameters.
The Set Remote Display Options screen lets you select the information that appears on the Remote
Displays, (Also See –
Section 2.5
From STORE PARAMETERS Screen (See –
Parameters Programming):
1. Click: to select [REMOTE DISP OPTIONS].
2. Click: . You are now in the Set Remote
Display Options screen.
3. Click:
desired Remote(s).
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
to select the dayparts to which you wish to copy the targets you have
to move the field to the top of the screen to the [TARGET], [DAY] and
to scroll through the TARGET, DAY, and DAYPART values to confirm
®
3000 Series Timer. Since the Timer has no printing
capabilities, none of the selections should be checked!
Remote Displays and
Section 4.12
to move the field to the
Confidential Document:
Copyright 2012. [Unpublished Work]. All rights reserved
Section 2.5.1 Set Remote Addressing):
Page 59 of 82