Set Shifts - Delphi Display Systems RDS-INSFTTCU Configuration And User's Manual

Delphi Display Systems, Inc. RDS-INSFTTCU
11. Click: or
the [=] field of the first dayparts (moving from top to bottom, or 1 to 8) you want to remove.
12. Click: to delete the dayparts. Any dayparts that follow will automatically be removed as
well. And the store's closing time will automatically be entered in place of the STOP time for the last
remaining dayparts.
NOTE: If all days use the same dayparts, you can set the dayparts for only one day and then use
the COPY TO feature to copy the same settings to all other days, as explained in the following
steps.
13. Click:
14. Click: or
15. Click: to move the field to COPY.
16. Click: to move the field to <ENTER>.
17. Click: to copy the displayed dayparts settings to all other days, replacing any individual
dayparts previously set for these days.

4.12.5 Set Shifts

NOTE: Unit Parameters is a simpler way to view and or configure the timer's parameters.
The Set Shifts screen lets you divide each day into smaller units called shifts, which are used to group
data for viewing and reporting.
From STORE PARAMETERS Screen:
1. Click: to select [SHIFTS].
2. Click: . You are now in the Set Shifts screen,
and the field is on DAY.
3. Click: to move field immediately to the right
of DAY: if you want to change the day.
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
or or
to move the field immediately to the right of DAY:.
to select the desired day from which to copy.
Confidential Document:
Copyright 2012. [Unpublished Work]. All rights reserved
to delete dayparts by moving the field to
Page 55 of 82