Print Setup; Exit; Status Bar; Unit Parameters - Delphi Display Systems RDS-INSFTTCU Configuration And User's Manual

Delphi Display Systems, Inc. RDS-INSFTTCU

4.3.5 Print Setup

4.3.6 Exit

When you select Exit from the Menu Bar, the Software application closes.
W ! Any manual report that was created and not saved will be lost. The data is not lost so the
ARNING
manual report can be recreated without downloading from the Fast Track

4.4 Status Bar

The Status Bar is displayed at the bottom of the Software application. System status and hints about
Menu Bar commands display on the left side while an indicator on the right shows if Caps Lock, Num
Lock or Scroll Lock is on.

4.5 Unit Parameters

Unit Parameters is used to download the parameters from your Fast Track
computer make necessary changes to the parameters and then upload them back to your Fast Track
Timer. You may also save your parameter configuration or those parameter changes as a file on your
personal computer or onto removable media as a backup.
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
Confidential Document:
Copyright 2012. [Unpublished Work]. All rights reserved
Page 22 of 82
When you select Print
Setup from the Menu
Bar, a standard window
Print Setup dialog box
opens up allowing you to
configure a printer to
print your reports too.
You may change the
paper orientation to
portrait or landscape.
You can also change the
paper size and paper
source.
®
Timer.
®
Timer to your personal
®