Remove Car; Reset Loop - Delphi Display Systems RDS-INSFTTCU Configuration And User's Manual

Delphi Display Systems, Inc. RDS-INSFTTCU

4.10.7 Remove Car

THIS FEATURE REQUIRES AN ACCESS CODE FOR ENTRY
The Remove Car screen lets you manually synchronize the Fast Track
need this option, however, as the Timer normally synchronizes itself.
Start from MENU Screen (See –
1. Click: . You are prompted to enter an Access Code.
2. Enter your six-digit Access Code. You are now in the Remove Car screen.
1. Click: or
2. Click: . The car count is now decreased by one (to the right of the = sign).

4.10.8 Reset Loop

THIS FEATURE REQUIRES AN ACCESS CODE FOR ENTRY
This screen lets you manually reset an internal Fast Track
remained ON. This action should rarely be required. If this happens regularly, call your local service
company to investigate and make necessary repairs.
NOTE: Reset Loop feature should only be used when an L light is on and there is no car at that particular
detection point. Example: L4 is on, the Timer is running, but no cars are in the drive-thru lane for that
particular detection point. Generally, L1 and L2 – when used for Menu and Greet – cannot be reset from the
Fast Track Timer. Reset loop is for internal loop detection only.
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
Section 4.10.6 Menu). The field is on [Remove Car From Lane]:
or or
Confidential Document:
Copyright 2012. [Unpublished Work]. All rights reserved
®
3000 Series Timer. You will rarely
to move to the station you want to adjust.
®
3000 Series Timer Loop Detector that
Page 37 of 82