Oce BLM 500 Operating Information Manual page 81

Procedure 1
[41]
Step
1
2
3
4
5
6
7
8
9
Procedure 2
[42]
[42]
[42] Remove the stitch head wire holder
A
Action
Stop the Booklet maker.
Open the folder cover.
Lift the clincher frame.
Remove the jammed paper.
Check for broken or damaged
stitches in the clincher area.
Manually operate the clincher
to clear any stitches that are
jammed.
Lower the clincher frame.
Close the folder cover.
If there is paper in the
gathering area, touch START,
then touchADVANCED >
PURGE SET > MAKE
BOOK.
Continue the print job.
Stitch head
Clear a Stitch Head Jam
Information
Touch the STOP button
Open and Close the Folder Cover
on page 37
Lift and Lower the Clincher Frame
on page 38.
[41]
A
Press to manually operate the
clincher.
Lift and Lower the Clincher Frame
on page 38
This action clears paper from the
BLM 500 / Bookletmaker 50and
resets the stitch head.
A
B
C
81