Oce BLM 500 Operating Information Manual page 110

Install New Stitch Wire
Install the Stitch Wire into the Stitch Head
[65]
Step
1
2
3
4
5
Close the Booklet maker
[66]
Step
1
2
3
110 Chapter 6 Maintenance
Action
Pull the stitch wire from the
end of the stitch wire guide.
Make sure the stitch wire runs
behind the gas-strut.
Feed the end of the stitch wire
between the felt
wire-cleaning pads.
Push the stitch wire into the
stitch wire guide block.
Push the stitch wire as far as
possible.
Action
Close the stitch-wire cabinet.
Lower the Booklet maker
main deck.
Lower the clincher frame.
Information
[71]
[72]
Detail A: Felt Wire-Cleaning Pads
[73]
Push stitch wire in direction of arrow
[74]
A
Detail A:Make sure the stitch wire runs
between the wire feed rollers and into
the middle wire tube.
Information
(see 'Lower the Clincher Frame' on
page 39).
A