Book Quality
Problem
The stitch is not on
the center-line of
the spine
The books do not
stack on the
stacker
The book cover is
dirty or marked
[23]
Marks on the spine
[24]
Marks beside the spine
Cause
The wrong paper size was
entered on the touch screen.
The Booklet maker
adjustment system is not
calibrated correctly.
The collection table is in the
wrong position.
The former roller is dirty.
The former clamp is dirty.
Book Quality
Solution
Measure the paper and enter
the correct dimensions.
Touch RE-REF in the
ADVANCED window to
calibrate the Booklet maker
adjustment axes.
(see table 11
on page
29)
Adjust the position of the
collection table to fit the size
of the finished book.
the Stacker on page 45
Clean the former roller
'Clean the Former Roller' on
page
94).
Clean the Polyurethane Strips
in the Form Clamp on page 96
Adjust
(see
65