If there is paper in the gathering area, touch START
5.
> PURGE SET > PURGE SET to clear the set from the machine.
Continue the print job.
6.
Jam in the Gathering Area
Open the connecting bridge cover.
1.
Lift the gathering area cover.
2.
Remove the jammed paper.
3.
Check the belts are in the correct position. Adjust the position of the belts if
4.
necessary.
Close the gathering area cover.
5.
Close the connecting bridge cover.
6.
Touch STOP
7.
Continue the print job.
8.
figure 34 on page 70
to clear the message from the screen.
Clear Paper Jams
, then touch ADVANCED
71