Run The Job - Oce BLM 500 Operating Information Manual

Run the Job

Run the Job
Make sure the adjustments on the Booklet maker are complete before you release the
1.
print job from the print queue.
Start the print job. The Booklet maker starts automatically.
2.
Check the quality of the first book.
3.
If the quality is not acceptable, make adjustments
4.
Result
During the job
Unload books from the stacker before the stacker is full. The Booklet maker stops
and displays a message if the stacker is full.
Empty the trim bin from time to time. The Booklet maker displays a message if
the trim bin is full
18 Chapter 2 How to run the Booklet maker
(see 'Empty the Trim Bin' on page
(see 'Book Quality' on page
43).
63).