Oce BLM 500 Operating Information Manual page 57

Problem
FORM CLAMP
CLOSED
FORM ROLLER ERROR The form roller is
FORM ROLLER NOT
PARKED
GATHERING AREA
COVER OPEN
INVERTER ERROR
JAM AT BRIDGE
INFEED
JAM AT FORM
ROLLER
JAM BEFORE
TRIMMER
JAM IN CONNECTING
BRIDGE
Cause
The form clamp is in the
wrong position. Touch
START to reset the
position. Follow the
instructions on the screen.
jammed. Clear the jam
and continue.
The form roller is in the
wrong position. Touch
START to reset the
position. Follow the
instructions on the screen.
Close the gathering area
cover if you need to
operate the machine
online.
Check for a paper jam and
clear if necessary.
Touch STOP to clear the
message from the screen.
If the problem continues,
contact your service
engineer.
There is a paper jam at the
infeed to the connecting
bridge. Clear the jam and
continue.
The form roller is
jammed. Open the folder
cover and remove the jam.
There is a book jammed
before the trimmer. Clear
the jam and continue.
There is a paper jam in the
connecting bridge. Clear
the jam and continue.
Error Messages
Solution
(see 'Jam in the Trim
Area' on page 74)
(see 'Clear Paper Jams'
on page 68)
(see 'Jam in the Trim
Area' on page 74).
(see '' on page 73).
(see 'Jam in the
Connecting Bridge' on
page 70)
57