Oce BLM 500 Operating Information Manual page 74

Clear Paper Jams
Jam in the Trim Area
[35]
Step
1
2
3
4
5
6
7
8
9
74 Chapter 5 Error Conditions, Problems, and Solutions
Action
Remove the trim bin.
Loosen the 2 orange plastic
hand screws to release the
locking plates.
Pull the trim stop guard
towards you.
Remove the jammed book.
Push the trim stop guard into
position.
Hold the locking plates in
position and tighten the orange
hand screws.
Attach the trim bin.
Touch START, then touch
ADVANCED > PURGE SET
> PURGE SET.
Continue the print job.
Information
The locking plates can rotate to
release the trim stop guard.
Check the trim stop and remove
any pieces of trimmed paper.
This action clears any other paper
from the Booklet maker.