Oce BLM 500 Operating Information Manual page 60

Error Messages
Problem
SHUTTLE MOTOR
ERROR
SHUTTLE NOT
PARKED
Sidelay axis moving
STACKER FULL
Stitch axis moving
Stitch position adjusting
60 Chapter 5 Error Conditions, Problems, and Solutions
Cause
Use the ON/OFF switch.
Turn the machine OFF,
then turn the machine
ON. If the problem
continues, call your
service engineer.
The shuttle is in the
wrong position. Touch
START to reset the
position.
Then touch STOP to clear
the message from the
screen.
The sidelay axis (size
adjustment) is adjusting.
This message clears when
the adjustment is
complete.
If the message does not
clear, touchADVANCED
> RE REF.
The stacker is full.
Unload the books from
the stacker.
The stitch axis is moving.
This message clears when
the adjustment is
complete.
If the message does not
clear, touchADVANCED
> RE REF.
The stitch position is
adjusting. This message
clears when the
adjustment is complete.
If the message does not
clear, touchADVANCED
> RE REF.
Solution