Oce BLM 500 Operating Information Manual page 72

Clear Paper Jams
Jam in the Stitch Area
[33]
Step
1
2
3
4
5
6
7
8
Jam in the Folder or Former Area
Open the folder cover.
1.
Remove the jammed paper. If you cannot see the paper in the former area.
2.
in the Trim Area' on page
Close the folder cover.
3.
If there is paper in the gathering area, touch START
4.
PURGE SET > PURGE SET to clear the set from the machine.
Continue the print job.
5.
Jam before the Trimmer
The error message JAM BEFORE TRIMMER is displayed. This error can be
a book jammed before the trimmer
1.
a piece of paper trimming has covered the jam sensor
2.
72 Chapter 5 Error Conditions, Problems, and Solutions
Action
Open the folder cover.
Lift the clincher frame.
Remove the jammed paper.
Check for broken or damaged
stitches in the clincher area.
Manually operate the clincher
to clear any stitches that are
jammed.
Lower the clincher frame.
Close the folder cover.
If there is paper in the
gathering area, touch START,
then touch ADVANCED >
PURGE SET > PURGE
SET.
Continue the print job.
74)
Information
(see 'Open and Close the Folder
Cover' on page 37)
(see 'Lift and Lower the Clincher
Frame' on page 38).
[35]
A
Press to manually operate the
clincher.
(see 'Lift and Lower the Clincher
Frame' on page 38)
This action clears paper from the
BLM 500 / Bookletmaker 50.
, then touch ADVANCED >
(see 'Jam