Oce BLM 500 Operating Information Manual page 70

Clear Paper Jams
[32]
A
B
C
[34]
[34] Gathering Area Belt Positions
Jam in the Bridge Infeed
Open the bridge infeed cover.
1.
Remove the jammed paper.
2.
Close the bridge infeed cover.
3.
Touch STOP
4.
If there is paper in the gathering area, touch START
5.
> PURGE SET > PURGE SET to clear the set from the machine.
Continue the print job.
6.
Jam in the Connecting Bridge
Open the connecting bridge cover.
1.
Remove the jammed paper. Do not damage or move the belts.
2.
Close the connecting bridge cover.
3.
Touch STOP
4.
70 Chapter 5 Error Conditions, Problems, and Solutions
Orange Plastic Hand Screw
Locking Plate
Trim Stop Guard
to clear the message from the screen.
to clear the message from the screen.
, then touch ADVANCED